![2.0 - 1.6 inch BONE FPV: Botanist [Easy to Fit] — modelo 3D](https://r2.centro3d.com/m/53e8fc0b8cc92b218c4597e8/1280.webp)
2.0 - 1.6 inch BONE FPV: Botanist [Easy to Fit]
por Jaziwen Sung en Thingiverse
Printed in one go！ the motor holes make motor installation easier and require no tapping. After topology optimization, the FPV frame looks a little better (maybe). It is also 2 grams lighter. If you are not satisfied with its strength, you can scale up the Z-axis separately by another 10% during...
Licencia
Uso comercial permitidoCC BY-SA 4.0 — Atribución, compartir igual
Puedes usarlo y modificarlo dando crédito; las versiones modificadas deben compartirse con la misma licencia.
Al descargar aceptas respetar la licencia y dar crédito a Jaziwen Sung.
Archivos (1)
- Categoría
- Repuestos
- Formatos
- OBJ
- Descargas
- 0
- Publicado
Sobre este modelo
Printed in one go！ the motor holes make motor installation easier and require no tapping. After topology optimization, the FPV frame looks a little better (maybe). It is also 2 grams lighter. If you are not satisfied with its strength, you can scale up the Z-axis separately by another 10% during printing. ABS filament and FDM printing are strongly recommended.
Descripción original del autor, publicada en Thingiverse.
