18650 charger (4x)
por DrFresa <3 en Printables
Charger base for 4 18650 cells
Licencia
Uso comercial permitidoPuedes imprimirlo, modificarlo y venderlo dando crédito al autor.
Al descargar aceptas respetar la licencia y dar crédito a DrFresa <3.
- Categoría
- Tecnología
- Formatos
- STL, GCODE
- Descargas
- 0
- Publicado
Sobre este modelo
I built this 18650 cell charger using four TP4056 (Type-C) modules. For the contacts, I used battery contact components sourced from AliExpress. You can connect the inputs of the TP4056 modules in series so that plugging in one powers them all, or you can leave them disconnected, in which case each module requires its own USB connection. The cover is just fricction fitted, but you can glue it. Some soldering is involved, but its not a difficult job. No support, 25% infill, 0,28mm layer height andPLA+ has worked fine for me.
Descripción original del autor, publicada en Printables.
